首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器
最新

LMR61440-Q1

現行

Automotive, 36VIN, 4A synchronous step-down converter for high efficiency and low output noise

立即訂購
產品規格表

LMR61440-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 4 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Fixed soft start, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000004 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 4 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Fixed soft start, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000004 Duty cycle (max) (%) 98 TI functional safety category Functional Safety-Capable
WQFN-HR (RAK) 9 5 mm² 2.5 x 2
  • Mitigated interference and noise technology – architecture 1 (MINT 1):
    • Low output noise optimized dual random spread spectrum (DRSS)
    • Facilitates CISPR 25 class 5 compliance
    • Low inductance HotRod™ QFN package
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • Wide operating input voltage: 3V to 36V (42V absolute maximum)
  • Programmable output voltage options available in fixed 3.3V/ADJ and 5V/ADJ
    • Adjustable output voltage range from 1V to 20V
  • Ultra-low quiescent current
    • Shutdown current: 0.75µA
    • No load standby current: 3.8µA
  • Optimized control loop for low output capacitance
  • Switching frequency from 200kHz – 2.2MHz
  • Low minimum tON (30ns typical)
  • FPWM, PFM, or external frequency synchronization available
  • Designed for scalable power supplies
  • Power-Good output for power sequencing
  • Mitigated interference and noise technology – architecture 1 (MINT 1):
    • Low output noise optimized dual random spread spectrum (DRSS)
    • Facilitates CISPR 25 class 5 compliance
    • Low inductance HotRod™ QFN package
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • Functional Safety-Capable
  • Wide operating input voltage: 3V to 36V (42V absolute maximum)
  • Programmable output voltage options available in fixed 3.3V/ADJ and 5V/ADJ
    • Adjustable output voltage range from 1V to 20V
  • Ultra-low quiescent current
    • Shutdown current: 0.75µA
    • No load standby current: 3.8µA
  • Optimized control loop for low output capacitance
  • Switching frequency from 200kHz – 2.2MHz
  • Low minimum tON (30ns typical)
  • FPWM, PFM, or external frequency synchronization available
  • Designed for scalable power supplies
  • Power-Good output for power sequencing

The LMR61440-Q1 is a 3V to 36V (42V transient), 4A, synchronous buck converter in an ultra compact 2.5mm × 2mm QFN-9 package with wettable flanks. The LMR61440-Q1 with mitigated interference and noise technology using architecture 1 features (MINT 1) enables the device to achieve low EMI performance and low output noise to facilitate noise-sensitive designs.

All device variants are capable of output voltages ranging from 1V to 20V in adjustable output configuration. Each variant is also capable of delivering a fixed output voltage by connecting the output voltage node directly to the feedback pin. The Device Comparison Table provides details on the fixed output voltage options. The current-mode control architecture with 30ns minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.

Open drain power-good output facilitates power sequencing requirements. The MODE/SYNC pin of the LMR61440-Q1 allows the user to select between forced pulse width modulation (FPWM), auto mode, or external synchronization mode of operation.

The LMR61440-Q1 is designed to offer reduced output capacitance leading to compact PCB layout and system cost savings. The LMR61440-Q1 is a part of a family of pin-compatible devices ranging in current levels from 0.6A to 6A.

The LMR61440-Q1 is a 3V to 36V (42V transient), 4A, synchronous buck converter in an ultra compact 2.5mm × 2mm QFN-9 package with wettable flanks. The LMR61440-Q1 with mitigated interference and noise technology using architecture 1 features (MINT 1) enables the device to achieve low EMI performance and low output noise to facilitate noise-sensitive designs.

All device variants are capable of output voltages ranging from 1V to 20V in adjustable output configuration. Each variant is also capable of delivering a fixed output voltage by connecting the output voltage node directly to the feedback pin. The Device Comparison Table provides details on the fixed output voltage options. The current-mode control architecture with 30ns minimum on-time allows high conversion ratios at high frequencies, fast transient response, and excellent load and line regulation.

Open drain power-good output facilitates power sequencing requirements. The MODE/SYNC pin of the LMR61440-Q1 allows the user to select between forced pulse width modulation (FPWM), auto mode, or external synchronization mode of operation.

The LMR61440-Q1 is designed to offer reduced output capacitance leading to compact PCB layout and system cost savings. The LMR61440-Q1 is a part of a family of pin-compatible devices ranging in current levels from 0.6A to 6A.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 日期
* Data sheet LMR61440-Q1 36V, 4A , MINT 1, Automotive Synchronous Buck Converter With Optimized Spread Spectrum for Flat Output Noise datasheet PDF | HTML 2026年 6月 22日
Functional safety information LMR614x0-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026年 6月 2日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMR60440QEVM — LMR60440-Q1 評估模組

LMR60440-Q1 是採用同步整流的 36V DC/DC、4A 降壓轉換器，可在小型元件封裝中實現高轉換效率。EVM 可在 8V 至 36V 的廣泛輸入電壓範圍內運作，以 2.2MHz 的切換頻率提供最高 4A 負載的穩壓 3.3V 輸出。LMR60440QEVM 可在全負載時支援高於 1% 的輸出電壓穩壓準確度，且輸出電壓的設定值可使用外部電阻分壓器進行調整。
使用指南: PDF | HTML
TI.com 無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-HR (RAK) 9 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片